---

PLOT PAGES (8 of 9)

RUNWAY PLOT

The Runway Plot page consists of four graphs:

• Aircraft position (aircraft position on the runway; Y axis scale is dependent on runway width, X axis scale is dependent on runway length)
• Brake pedals (left and right pedal deflection; Y axis scale is 0 to100 %, X axis scale is dependent on runway length
• Speed (aircraft speed; Y axis scale is 0 to 200 kt, X axis scale is dependent on runway length)
• Rudder pedal (deflection left (negative) and right (positive) in degrees; Y axis scale is -20º to +20º, X axis scale is dependent on runway length)

The runway plots are active when the aircraft is on the active runway or less than 35 ft above it.

The 'zero' point on the graphs is the active runway threshold.

The graphs are sized to the actual active runway length as defined in the Navigation Data. There is no Scale control.

The plots are erased under the following conditions:

• Change in active runway
• When the Erase Track button is selected by the instructor

The position of Microbursts and Windshears are displayed using representative symbols (a shear sign and a spiral with a down arrow) on the aircraft position graph. The symbols are displayed in magenta.

The aircraft position graph displays a vertical yellow bar as an 'incident' marker. This is displayed when any malfunction is activated while this plot is active.